iA 660 Kit

When is enough enough??? If you aren't sure this may be the way to find out. Imagine the spool of the K16s but the punch of the shuttle on take off. Think this is an exaggeration, think again. This kit starts with all the knowledge we have gained from kits past. 600HP use to be the norm it isn't merely a stepping stone after this kit was released. We use Garrett turbos specially machined into the K16 housings.

We modify the factory wastegates and add all the normal goodies. Headers, mufflers, billet BOVs, air cleaner and a dose of GIACs magic. The result is a nasty 560+ to the wheels. Kit includes:

  • Modified K16 Turbo to accommodate Garrett turbos.

  • Custom Turbo mount bracket

  • 1.0 Custom wastegates, linkage and mounts

  • Billet diverter valve (pair) and clamps

  • 1 5/8 SS headers with pyramid collector with gasket and turbo mounting hardware (studs and copper lock nuts)

  • V Flow air box with 6 inch venture and cotton air filter. (must reuse OEM wafer)

  • Silicone F hose

  • Gen 3 high flow muffler twin can design no drone. Muffler straps and 4 v-band clamps

  • EVOMSit GT660 Hitachi Software Calibration. 660 hp / 652 tq On Pump Fuel Mode 91/93 Octane

  • V-FLOW Air Intake System
     89mm Billet MAF Housing, Machined For A Hitachi Hot Wire MAF Sensor
    -Hitachi MAF Sensor w/ Plug-and-Play Wiring Harness

  • Spark Plugs FR6 OEM

  • High Flow Fuel Injectors – High Impedance – Direct Replacement 650+cc
    Fuel Rail Upgrade Engine Management!

     

Total kit is $16465.00 Inquire about in-house installs!

For more information, click the email link below. We will get back to you in 24 hours or less.


Click here to send an e-mail inquiry.



OPTIONAL ACCESSORIES



Optional carbon fiber or aluminum intake tracks. Enlarged piping increases flow to turbo by 40% and reduces heat. Replaces restrictive factory intake. $2499.00

ImagineAuto custom lightweight flywheel and clutch package:
Part puck and part organic, this clutch is only available through ImagineAuto. Full kit with all bolts, TOB, ring gear. $1800.00

Optional High Pressure silicone hose kit is recommended with this kit. Add
$895.

Cars used as daily drivers with this kit are recommended to have internals of the engine strengthened.

*Turbo core required




IMAGINEAUTO, INC.   |   8344 MELROSE DRIVE   |   LENEXA, KS 66214   |   v. 913-310-9927   |   f. 913-322-8562   |   MON-FRI 8-5
TURBOS  |  EXHAUST  |  HEADERS  |  INTERCOOLERS  |  CLUTCHES  |  BRAKES  |  SUSPENSION  |  AERODYNAMICS  |  ECU TUNING  |  ENGINE REBUILDING
PORSCHE  |  AUDI  |  VOLKSWAGEN/VW  |  GERMAN  |  EUROPEAN  |  AND MORE