IAV-4(610HP)

This kit is no longer under development! We have accumulated data on the road courses and real time data to know that the numbers keep going up and drivability keeps getting better.

The IAV-4 includes all the components fro 1,2 and 3 (muffler and High Flow cats,, headers and ECU modification. We then add silicone reinforced boost hoses and intercoolers to top this kit off.  The intercoolers are 33% larger than the factory units and with CNCed end tanks will increase inlet volumes nearly 200%. The efficiency of the intercooler cores is increased another 36-49%.  What do all these stats mean? Under sustained runs and under boost the charged air into the motor will always remain cool. That means that the car will run its most aggressive maps and allowing you as the driver to have the most power available on tap. Grouped with 100 octane unlead fuel this system made 589RWHP on our in house dyno. 

Our on going testing is currently being conductive and we will post the HP increases as soon as they are conclude.

Typical Performance data

Times      Stock                            iAV-4 Package

0-60        3.9  Sec                           3.2 Sec

0-100      9.8  Sec                           7.1 Sec

60-130  12.8 Sec                            8.1 Sec

1/4 mile 12.22@117MPH             10.97@127.85MPH

Available versions for 91 or 93 octane, stock rev limiter or 7000 RPM. Switching now also available to include Valet, kill, race, pump and fire wall. Additional cost apply.

  How to remove the ECU? Click here for a full write up with pictures.

  $11950.00

(ECU mod must be flashed in house. No soldering. 24hour turn around)

Click Picture to access link of dyno graph

All dynos are performed in house on our AWD 500SE dyno.